
BMW B48 Forged Internals Package Level 1 (600HP Capable)
Regular price $4,249.99 AUD
The Forged BMW B48 & B46 Internals Package includes parts that are capable of withstanding up to 600HP at the crank!.
This kit when combined with the right turbo and bolt on parts, will allow you to run up to 600HP at the crank!. These kits come with all parts required, unfortunately a lot of the bolts installed in the B48 Motor cannot be reused once disassembled and as such must be replaced with OEM or aftermarket.
THIS KIT ONLY COMES WITH THE LISTED PARTS NOTHING ELSE.
Kit Includes:
- CP Carrillo 10.0:1 Pistons with Chrome moly Piston Pins 82mm Bore (coatings and upgraded pins available - however not necessary for this power level).
- Max Speeding Connecting Rods with ARP 2000 Rod Bolts - 600 HP rated
- OEM MLS Head Gasket 0.7mm thick (OE 11128654272)
- 10 x ARP Main Studs
- 10 x M8 x 30mm OEM Oil Deflector Securing Bolts (OE 11418612615)
- 2 x M8 x 110mm OEM Timing Cover Bolts (OE 11137800625)
- 11 x M6 x 31mm OEM Timing Cover Bolts (OE 11147797493)
- 3 x M8 x 40mm OEM Timing Cover Bolts (OE 07119907475)
- 1 x Crankshaft HUB Seal (OE 11118604931)
- 1 x Crankshaft Flywheel/Timing HUB Seal (OE 11148602594)
- 1 x OEM Cylinder Head Bolt Set (OE 11128644675) - We Recommend Upgrading to ARP Head Studs for boost over 36PSI
Parts Recommended but not included:
- Due to varying sizes of Rod Bearings and Main Bearings it is vital you have your engine builder measure these before ordering the correct size (some main bearings and rod bearings come in 3 different sizes!). We also recommend your engine shop source these bearings But an aftermarket Rod Bearing we HIGHLY recommend is the ACL TRI-METAL Racing Rod Bearings.
Important!
Timing Chain components are excluded and must be purchased separately if they're required to be replaced.
THIS KIT ONLY COMES WITH THE LISTED PARTS NOTHING ELSE.
If you have a specific enquiry please email us: navardituned@gmail.com
*Images are for demonstration purposes, and may not accurately reflect the purchased parts*
Warranty Information
B48 Rebuild Guide
By requesting a Custom Tune from “Navardi Tuned”, you, as the “Customer”, hereby represent that you understand the inherent risks of modifying the engine calibration through the use of software manipulation “ECU Tuning” and that you have full authority to authorize the tuning of this vehicle. You understand that some or all of these parts and/or tuning may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. You (The “Customer”) take full responsibility to ensure that any modifications or upgrades that you have done to your vehicle conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions.
Please note: Any modification recommendations provided by Navardi Tuned are general in nature and Navardi Tuned cannot be held liable for any engine damage and or vehicle damage caused by any parts that have been recommended. At the end of the day not all parts are made and installed the same way, as a result poor quality products can exist and unfortunately create potential damage to a clients engine.