BMW B48/46 Forged Internals Package Level 2 (750HP+ Capable)

BMW B48/46 Forged Internals Package Level 2 (750HP+ Capable)

Regular price $3,953.00 USD
Shipping calculated at checkout.

Piston Side Skirt & Dome Coating
Only 0 items in stock!

The Forged BMW B48 & B46 Internals Package includes parts that are capable of withstanding up to 750HP+ at the crank!.

This kit when combined with the right turbo and bolt on parts, will allow you to run up to 750 - 1000HP at the crank!. These kits come with all parts required, unfortunately a lot of the bolts installed in the B48 Motor cannot be reused once disassembled and as such must be replaced with OEM or aftermarket.


Kit Includes:
- CP Carrillo 10.0:1 Pistons with Steel Piston Pins 82mm Bore (Please enquire should you require a different compression/size).

- CP Carrillo H Beam Connecting Rods with Carr Rod Bolts

- OEM MLS Head Gasket 0.7mm thick (OE 11128654272)

- 10 x ARP Main Studs

- 10 x M8 x 30mm OEM Oil Deflector Securing Bolts (OE 11418612615)

- 2 x M8 x 110mm OEM Timing Cover Bolts (OE 11137800625)

- 11 x M6 x 31mm OEM Timing Cover Bolts (OE 11147797493)

- 3 x M8 x 40mm OEM Timing Cover Bolts (OE 07119907475)

- 1 x Crankshaft HUB Seal (OE 11118604931)

- 1 x Crankshaft Flywheel/Timing HUB Seal (OE 11148602594)

- 10 x ARP2000 Head Studs

Parts Recommended but not included:

  • Due to varying sizes of Rod Bearings and Main Bearings it is vital you have your engine builder measure these before ordering the correct size (some main bearings and rod bearings come in 3 different sizes!). We also recommend your engine shop source these bearings But an aftermarket Rod Bearing we HIGHLY recommend is the ACL TRI-METAL Racing Rod Bearings.


Timing Chain components are excluded and must be purchased separately if they're required to be replaced.

If you have a specific enquiry please email us:

*Images are for demonstration purposes, and may not accurately reflect the purchased parts*

Warranty Information
B48 Rebuild Guide

Upon purchase of a tuning related product you are agreeing to this disclaimer. Should you not agree with this disclaimer then a refund is processed within 48 hours.
If you purchase on a Friday evening or over the weekend, we are unable to process any orders until the next business day (usually Monday), we operate in the timezone for Sydney Australia which is GMT+10 timezone. 

By requesting a Custom Tune from “Navardi Tuned”, you, as the “Customer”, hereby represent that you understand the inherent risks of modifying the engine calibration through the use of software manipulation “ECU Tuning” and that you have full authority to authorize the tuning of this vehicle. You understand that some or all of these parts and/or tuning may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. You (The “Customer”) take full responsibility to ensure that any modifications or upgrades that you have done to your vehicle conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions.
You acknowledge that Navardi Tuned has made you aware that certain parts are intended for Racing Competition Only and not meant to be used on a road car. You absolve Navardi Tuned for any and all burden of responsibility in ensuring your car satisfies regulations set forth by Federal, State, and/or Local governing agencies.
You also absolve Navardi Tuned for any damages to your motor due altering the stock calibration of the motor( “ECU Tuning”), you understand that there are inherit risks with increasing the output of your motor above factory stock limits. We try our very best to ensure reliability and engine safety, but engine damage can occur due to a variety of reasons, for which we “Navardi Tuned” are not liable for.  
As the “Customer” you must understand that Navardi Tuned will not be held accountable for any illegal action committed whilst tuning this vehicle, Data-Logging should be done in a safe and legal environment such as a “Drag Strip” or “Race Track” or “Dynamometer”.
As the “Customer” you hereby represent that you know the condition of the vehicle and you assure that it is in acceptable condition to be tuned and data-logged for the purpose of tuning.
You the "Customer" must also understand that the purchase of this custom tune requires the purchase of the Bootmod3 tuning licence, which can be purchased from
You the "Customer" must also understand that all communication will be made via the comment feature in the custom tune request for all communication and/or support related requests.
Our Terms and Conditions can also be found on our website:
Our Privacy Policy:
Our Refund Policy: 

Please note: Any modification recommendations provided by Navardi Tuned are general in nature and Navardi Tuned cannot be held liable for any engine damage and or vehicle damage caused by any parts that have been recommended. At the end of the day not all parts are made and installed the same way, as a result poor quality products can exist and unfortunately create potential damage to a clients engine.
Built N20

Why choose us?

We are dedicated to helping the community grow.

Navardi Tuned is passionate about not only creating powerful and reliable tuning, but also about being transparent and offering open source information so the community can flourish.
We have started curating a N2x and B4x Wiki

N2x and B4x Wiki

Improving the N2x Platform

First correctly setup Full E85 N2x on Stock Turbo

Buy N2x Custom Tune Today

Breaking World Records

N2x World Power RECORD

Buy N2x Custom Tune Today

Pushing New Limits

B48TU 98 RON & METH Power Record

Buy B4x Custom Tune Today

Recently viewed