Navardi Tuned

BMW N20 Forged Internals Package Level 2 (750HP+ Capable)

Regular price
€3.773,95 EUR
Regular price
Sale price
€3.773,95 EUR
Tax included. Shipping calculated at checkout.
Piston Side Skirt & Dome Coating

Available On Enquiry, Please Contact Us.
The Forged BMW N20 & N26 Internals Package includes parts that are capable of withstanding up to 750-1000HP at the crank!.

This kit when combined with the right turbo and bolt on parts, will allow you to run up to 750-1000HP at the crank!. These kits come with all parts required, unfortunately a lot of the bolts installed in the N20 Motor cannot be reused once disassembled and as such must be replaced with OEM or aftermarket.

THIS KIT ONLY COMES WITH THE LISTED PARTS NOTHING ELSE.

Flanged & MID Wet Cylinder Sleeves are sold separately. We do not recommend respraying the factory Plasma Arc coating to the bores for this power, you will need to sleeve the block.

Kit Includes:
- CP Carrillo 10.0:1 Pistons with Upgraded Steel Pins 84mm Bore (Please enquire should you require a different compression/size).

- 4 x CP Carrillo H Beam Connecting Rods with CARR Rod Bolts

- Athena Cut - Ring Head Gasket

- 10 x M10 ARP Main Stud kit (require modification for Oil Pump clearance refer to the wiki)

- 16 x M8 x 30mm OEM Bed Plate Securing Bolts (OE 07129903926)

- 4 x M8 x 40mm OEM Crank/Flywheel Hub Bolts (OE 07119907475)

- 1 x Crankshaft HUB Seal (OE 11118618864)

- 1 x Crankshaft Flywheel HUB Seal (OE 11117587168)

- 2 x Spark plug / Injector Bucket Gaskets (OE 11127589830)

- 10 x M11 ARP Head Stud Kit (Requires the 4x Corner Head Bolt Holes to be Timeserted to accept 11mm Stud, Time Sert Specs are M11 x 30mm x 1.5)

- 1 x Valve Cover Gasket Set OEM (OE 11127588418)

- 1 x M10 x 30mm Oil Pump Drive Gear Bolt OEM (OE 11277619309)

- 1 x Oil Filter Housing to Cylinder Head OEM Gasket (OE 11428637821)


Parts Recommended but not included:

  • Due to varying sizes of Rod Bearings and Main Bearings it is vital you have your engine builder measure these before ordering the correct size (some main bearings and rod bearings come in 3 different sizes!). We also recommend your engine shop source these bearings But an aftermarket Rod Bearing we HIGHLY recommend is the ACL TRI-METAL Racing Rod Bearings or King Racing Sputter Rod Bearings.
  • For Main bearings we recommend King Bearings.
  • We also strongly recommend having the engine block semi or fully closed decked to help prevent cylinder wobble/walk under high boost!



Important!

Timing Chain components are excluded and must be purchased separately if they're required to be replaced.

We also exclude the Crankshaft HUB Capture Bolt this bolt is required to be replaced if your Engine Builder removes the HUB from the Crankshaft, Should you need it however please refer to OEM Part Number 11217614270 (Comes standard in our Timing Chain Repair Kit).

It is also important to note that you will need to replace the flywheel bolts (AT or MT each transmission has different bolts for their flywheels and torque converter) as they must be replaced once removed.

THIS KIT ONLY COMES WITH THE LISTED PARTS NOTHING ELSE.
If you have a specific enquiry please email us:
navardituned@gmail.com

*Images are for demonstration purposes, and may not accurately reflect the purchased parts*

Warranty Information
N20 Rebuild Guide

  • Hurry, only 1 item left in stock!
BMW N20 Forged Internals

Guarantees

Shopping Experience Guarantee

Great Quality, Honest and Reliable Goods & Services, With Prompt Fulfillment Timelines.

Customer Service Guarantee

Exception & Helpful Customer Service.

Privacy Guarantee

User Privacy Is Our Biggest Concern, Shop Safely With Us Knowing We Do Not Share Your Personal Data With Anyone, Or Corporate Entity.

Safety & Security Guarantee

Secure and Safe Checkout.

Testimonials

BMW N20 PWG
BMW Tuning
Bootmod3 Custom Tune
BMW F series
BMW F20 N20

I’ve met Harry from Navardi a couple off months ago and from that everything went straight upwards. He helped me out with different questions on my n20 engine with lower compression pistons.

Salem, Belgium

Awesome experience, Harrison’s work is remarkable. He did a wonderful job on BM3 custom tuning for my wagon F31 N20. Has excellent recommendations and resources. Without any doubts, eyes closed in trust any tune.

Billy, Canada

Harry at Navardi Tuned is the most knowledgeable tuner for these engines. My n20 now performs greater and more efficiently; strong, smooth, and consistent!

Spencer, USA

Perfect job done by Harrison on my BMW F33 420i engine.

Very serious, he spared no effort to provide me with top-level programming. Powerful, flexible reactive with maximum reliability.

I live in France the time difference has never been a problem. Depending on the datalogs produced, I received dozens of updates over several weeks. Excellent follow-up.
Definitely recommend Navardi Tuned!

Laurent, France

The most seamless experience, Harry (the owner) is the most helpful person I've ever met in this industry! I recieved endless support throughout the months before tuning, all the way through the tuning process, and a TON of follow up afterwards. Do not listen to some of the other reviews here on Google, they are spreading serious mis-information. They are all missing the fact that the owner of the troubled vehicle acted negligently in looking after a car that HE decided to tune well above factory specs... seemingly very idiosyncratic to a normal person. Regardless of this, if you want your BMW tuned to make it more enjoyable to drive, or to accompany any modifications you have done to it, you couldn't find a better guy than Harry.

Ryan, Australia